PP Plus
Batch Quality
Control
Light Grey
Epoxy Primer
(Light Grey) Epoxy Primer TEB-410
Contact for price(Matte)
Finish: Matte
TEB-410 is a premium 100% pure epoxy resin formulated with high-quality raw materials imported from Korea. Designed for exceptional adhesion across all surface types, its slow-curing property provides extended working time for precise application and adjustments. It is ideal for coating, casting, and heavy-duty repair works requiring maximum durability and strength.
Key Features
- Formulated with premium imported Korean pure epoxy materials.
- Superior adhesion capabilities on all surfaces including wood, metal, concrete, and plastics.
- Slow-curing formula extends pot life, offering maximum workability.
- The fully cured film is tough, highly resistant to impacts, chemicals, and moisture.
Application Guide
Step 1: Preparation
- Clean the surface thoroughly, ensuring it is free from dust, grease, oil, and moisture. For glossy surfaces, lightly sand to improve adhesion.
Step 2: Mixing (4:1 by Volume, 20-30% Thinner)
- Mix TEB-410 Resin with the Hardener (TEH-100) strictly at a 4:1 ratio. Stir the mixture slowly and consistently in one direction until fully homogenous and ready for spraying.
Step 3: Application & Cure
- Load the mixture into a spray gun and apply it onto the prepared vehicle surface. The slow-curing nature allows for a smooth and level finish. Leave to cure fully as per the recommended time (typically 24-48 hours, depending on room temperature).
Technical Specifications
- Color
- Light Grey
- Density
- 1.40g/cm³
- Flash Point
- 32°C
- Pot Life
- 4-6 Hours @ 30°C
- Size
- 4 L
Safety & Storage
- Keep containers tightly closed after each use. Store in a cool, dry place away from direct sunlight and heat sources. Wear a chemical respirator, protective gloves, and safety glasses during spray application. In case of skin contact, wash immediately with soap and water.